English
Suomi
Latviešu
Русский
Lietùvių
Eesti
Polski
Accessories and add-ons
Electro-hydraulic lift accessories
Grid View:
Hydraulic lift rubber 103mm LS220/LS230
7.00 €
Hydraulic lift rubber LS220/LS230
Suitable for lifts:LS
Rubber soles. spec Tesla MODEL 3 & Y & S & X S-TA4JP
9.00 €
Rubber soles. Special Tesla MODEL 3 & Y & S & X
RUBBER WHEEL FOR LIFT Ø 115mm
10.00 €
Rubber chisel pad 115mm
Inner diameter 105mm
Spacing between holes 70mm
PTFE lubricant for lift guides
10.00 €
Scope:
Lubrication and maintenance of moving and stationary car parts, joints, guide rails, door hinges, seat tracks, and locks
Advantages:
A lubricant containing PTFE (Teflon) that repels water effectively
Removes and reduces squeaking and creaking
Reduces friction and wear
Forms a clear, non-greasy sliding film
Non-conductive to electricity
Chemical anchor resin RESI FIX, CELO 330 ml
15.00 €
RESI FIX is a high-quality chemical anchoring resin designed for reliable fastening under medium and heavy loads. It is suitable for both professional builders and DIY enthusiasts looking for a durable and versatile solution.
This resin is used together with dowels, reinforcement bars, and other anchoring elements. RESI FIX works excellently in various materials – from solid concrete to porous or hollow blocks, masonry, fibo blocks, ceramic bricks, aerated concrete, or natural stone.
Due to its composition, RESI FIX hardens quickly and ensures strong adhesion, making the fastening points durable and resistant to loads and environmental effects.
Suitable for both indoor and outdoor work, for installing structural elements, railings, supports, devices, lifts, etc.
Advantages:
Minimum installation temperature -10 °C;
Can be used indoors
Does not cause stress to the mounting base;
It freezes and doesn't recede;
Long shelf life;
Can be used in wet concrete and in holes filled with water;
CE certificate (for threaded rods and reinforcing bars in concrete);
Resistance to chemicals.
Grease for ropes and gears
15.00 €
Scope:
Lubrication and maintenance of hoists, cable mechanisms, gears, chains, sprockets, and sliding rails
Advantages:
Holds perfectly on parts even under extreme loads
Reduces wear and noise
Protects against corrosion
Repels water and moisture, resistant to the most common acids and alkalis
Contains molybdenum sulfite
Hydraulic oil 10L
35.00 €
Universal hydraulic oil, designed for use in lubricating transmissions, gears, differentials, axle bridges, hubs, hydraulics, power steering, lifts, and other power transmission systems of agricultural machinery, tractors, and other equipment.
Set of Ø50mm h90mm extensions, 4 pieces, for the hydraulic lift pad.
60.00 €
Set of Ø50mm h90mm extensions, 4 pieces, for the hydraulic lift pad.
Chemical anchoring kit for lift installation (without oil)
80.00 €
The kit is a ready-made solution for fixing a lift to concrete using chemical anchoring. The set includes three 330 ml Celo Resi FIX resins, which ensure strong and reliable adhesion to the substrate, even under heavy loads. It also comes with a set of 10 M18 x 300mm 8.8 grade studs with nuts, allowing for quick and precise installation. This configuration helps avoid additional searches and ensures that you have everything needed to carry out the installation work efficiently.
Advantages:
Chemical anchoring is suitable for heavy loads
High-quality fasteners
Simplifies preparation for installation
Suitable for fastening lifts and other equipment to concrete
Chemical anchoring kit for lift installation (with 10L oil)
115.00 €
This kit is a complete solution for lift installation, from fastening to preparation for use. The set includes three 330 ml chemical anchoring resins, Resi FIX Celo, ensuring strong anchoring in concrete. The kit also contains 10 pcs of M18 x 300mm 8.8 grade studs with nuts, designed for reliable structural fastening. Additionally, 10 liters of hydraulic oil are included, required for filling lift systems. This kit helps save time and get ready for full lift installation and commissioning.
Advantages:
Complete kit for lift installation and commissioning
Chemical anchoring for heavy loads
Grade 8.8 M18 bolts with nuts
10 liters of hydraulic oil for filling systems
A convenient solution without additional searches
Additional mounting beam for the lift attachment
160.00 €
Additional mounting beam for the lift attachment
Special-purpose beams suitable for EVO-45 / EVO-45E and EVO-45DEH lift models. They allow the lift to be installed when the foundation is in poorer condition or additional reinforcement is needed.
Technical Data:
Mounting points:nine
Length:140 cm
Width:8 cm
Configuration:
All parts are provided in quantities of 14.:
Anchor bolts
Nuts
Flat washers
Spring washers
ATTENTION:The fastening base (foundation) must be assessed by a qualified specialist to determine whether it is suitable for use, even when installing reinforcement beams. All responsibility for attaching the lift rests with the buyer.
EVO-TRA Lifting/Support Beam Set for Scissor Lifts
390.00 €
Crossbeams with anti-slip supports – 2 pcs (crossbeam metal thickness 6 mm)
Support sole holder – 4 pcs
Support pad in a metal casing with a rubber cover (130 mm diameter)
33 mm spacers – 8 pcs
Crossbar length 1600 mm
Crossbar min. height 60 mm
Showing 1 to 15 of 15 (1 Pages)